The Airbot F7 flight controller uses the ICM20602 over SPI for ultimate flight performance. Also onboard is an AB7456 OSD chip

for fully integrated BetaFlight OSD support. Other features of the Airbot F7 include: 3-6S direct LiPo input, 6x hardware UARTs, 1x

external I2C, 1x external SPI, camera control, onboard flash, a micro RX connector, a 4-in-1 ESC connector, and a low profile for easy installs.


 

Specification:

STM32 F722 MCU, Runs Betaflight firmware

• ICM Gyro Over SPI Bus

• 30.5*30.5 mm Mounting holes

• Supports Lipo direct plugin (3-6S)

• Supports 5V 2A BEC output (Buck)

• STM32 controls OSD chip over SPI in DMA mode (Betaflight OSD)

• More UARTs (6xUARTs)

• Supports camera control function

• Supports ext. Gyro box

• Onboard 128Mbit(16MB) flash for balckbox


Package Included:

1x Airbot F7 Flight Controller

Uzrakstīt atsauksmi

Lūdzu login vai register lai atstātu atsauksmi

Airbot F7 Flight Controller

  • Ražotājs: Airbot
  • Produkta kods: F7
  • Pieejamība: Izpārdots
  • 38.50€

  • bez PVN: 31.82€

Saistītie produkti

Cable JST 8 pin 30mm For 4in1 ESC

Cable JST 8 pin 30mm For 4in1 ESC

This is a silicone cable harness designed to connect your airbot flight controller directly to an ai..

1.15€ bez PVN: 0.95€

Cable JST 8 pin 70mm For 4in1 ESC

Cable JST 8 pin 70mm For 4in1 ESC

This is a silicone cable harness designed to connect your airbot flight controller directly to an ai..

1.15€ bez PVN: 0.95€

Cable set SH1.0

Cable set SH1.0

Pre-crimped silicone wires and spare JST SH1.0 connectorsPackage Included:12 x 55MM 12x 105MM 12x 15..

4.90€ bez PVN: 4.05€